Capsule packaging machine with 4800plate/hour automatic blister sealing machine
Introduction:
Automatic blister sealing machine has the advantages of extending the retention period, beautifying the product, and reducing packaging costs. Because the capsule packaging machine occupies a small area, low investment, multi-functional use, high efficiency, no pollution, and low noise, it is an ideal packaging equipment for purifying workshops and hospital reagent rooms.
Features of Capsule packaging machine with 4800plate/hour automatic blister sealing machine:
1. Use domestic high-power transmission mechanism is adopted, and the main rotating shaft is driven by the chain, eliminating the errors and noise of other gear transmissions;
2. The appliance adopts an imported control system, which can be configured with missing material missing and missing device and missing particle detection and removal device according to customer requirements;
3. The whole machine adopts segmented combination: PVC forming, feeding, heat sealing is one segment, and tropical aluminum cold forming, heat sealing, and punching are divided into one segment for split packaging;
4.Using photoelectric control system, PVC, PTP, rigid aluminum packaging automatic feeding, waste edge automatic punching device to ensure the long-distance multi-station synchronization stability;
5. Can be equipped with additional photoelectric detection and correction device, imported stepper motor traction, graphic and text printing and packaging to optimize the packaging grade;
6. This automatic blister sealing machine is suitable for: blister-sealed packaging of sugar-coated candy, gel pills, injections, special shapes, etc., as well as medical equipment, light food, and electronic components.
Verious of Capsule packaging machine with 4800plate/hour automatic blister sealing machine:
Main Parameter of Capsule packaging machine with 4800plate/hour automatic blister sealing machine:
| Punching frequency: 10-40 times/min, 4800plate/hour |
| Normal section: 57*80mm |
Specification: 27*110mm one plate per time |
| Max forming area: 130*110*26mm |
60*100mm one plate per time |
| The feed stroke range: 20-70mm |
|
| Yield rate: more than 99% |
Motor power: 1.5kw |
| Forming heating power: 0.9kw |
Low heating power: 0.9kw |
| Heat sealing power: 0.8kw |
Gas mercury passenger volume: more than 0.3m3 |
| Cooling: circulating water or tap water |
Weight: 600kg |
| Dimension: 2150*550*1370mm |
|
| Packing material: Medicinal PVC 0.3*140MM Aluminum foil 0.023*140mm |
Detail Shows of Capsule packaging machine with 4800plate/hour automatic blister sealing machine:
Real Photos of Capsule packaging machine with 4800plate/hour automatic blister sealing machine:
Application of Capsule packaging machine with 4800plate/hour automatic blister sealing machine:
Installation and precautions of Capsule packaging machine with 4800plate/hour automatic blister sealing machine:
1. Check whether the ground level is balanced before installation.
2. The ground wire should be connected at the location specified on the grounding label.
3. Full-time personnel training operation and maintenance.
4. The machine should be kept clean and tidy.
5. All parts of the machine must be refueled before production (refer to the operating provisions)
6. When the machine leaves the factory, the gearbox strap lubricating oil must be refueled before production.
7. It is recommended to use oil-free air compressor for this machine.
8. The pressure of forming, heat sealing, indentation and other parts should not be too high, otherwise it will affect the service life. There should be a floating margin of about one millimeter for the forming and indentation of the pad.
Pharmacy Process of Capsule packaging machine with 4800plate/hour automatic blister sealing machine:
Your message must be between 20-3,000 characters!
